Front Fender – Red

Front Fender – Red

Brand: BETA

Reference 043.43.006.00.97

Last items in stock

€18.08

Tax included

Genuine Beta front fender in red for RED RR 125 4T Enduro. This front guard is designed as an OEM-equivalent component to ensure perfect fit and durability.

Guaranteed compatibility with Beta RED RR 125 4T (2021, 2023, 2025)
Original equipment quality for reliable protection and look
Robust design to shield against debris and trail grime
Part number: 043.43.006.00.97
Sold through RAW Motorsports - BETA

Stock availibility Yes

Quantité

Description
Vehicle compatibility

Genuine Beta front fender, red colour, specifically engineered for Enduro RED RR 125 4T and related variants. Manufactured by the original equipment maker, this fender guarantees perfect fit and long-lasting reliability.

Compliance with Beta specifications for enhanced durability
Easy installation with an exact fit
Effective protection against debris, mud and spray on off-road trails
Compatible models: Beta 2021, 2023, 2025 – RED RR 125 4T
Part reference: 043.43.006.00.97
Available from RAW Motorsports – BETA

Compatibilités véhicule

Modèles compatibles vérifiés

3

BETA 2021-2025

Voir tous les modèles compatibles

2025 BETA ENDURO RED RR 125 4T T 125cc

2023 BETA ENDURO RED RR 125 4T T 125cc

2021 BETA ENDURO RED RR 125 4T LC 125cc

In stock 1 Item

16 other products in the same category:

Footrest Pin – 3x20 mm – Original Equipment

Shipped the 12/12/2025

BETA OEM Parts

Footrest Pin – 3x20

Footrest Pin 3x20 mm, original equipment part designed for a secure, durable mounting of the footrest on compatible models. Quick fit and robust under vibration and dirt.3x20 mm dimensions for precise alignmentCorrosion and impact resistant

T.C.C.E. M5x20 Screw

Shipped the 12/12/2025

BETA OEM Parts

T.C.C.E. M5x20 Screw

T.C.C.E. M5x20 Screw, original Beta part for engine cover. Quick, reliable replacement for 50cc 2T Beta bikes.OEM quality from BETA: exact fitSize M5 x 20 mm for secure mountingCorrosion-resistant steel, durable under vibrationBroad compatibility with 50cc Beta Motard/Enduro 2T models (2020-2025)

EPDM O-ring 23,52.1,78 – Clutch OEM Beta | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

EPDM O-ring – 23,52.1,78

OEM Beta EPDM O-ring for clutch seal, durable and oil resistant.Precise fit for Beta clutch assemblies, easy replacement.EPDM material ensures long-lasting performance under off-road conditions.

OR 25,12.1,78

Shipped the 12/12/2025

BETA OEM Parts

OR 25,12.1,78

Original equipment replacement, engineered for perfect fit and long-lasting reliability.Compatible with Enduro and Cross ranges 2020-2026 (125cc to 480cc, 2T/4T).Direct-fit installation with no adaptation, ensuring improved handling and stability.

BETA Washer 10.20.1,5 – Chassis Accessories | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Washer 10.20.1,5

031.32.001.00.00

Original BETA washer, 10.20.1,5, designed for chassis components to ensure a reliable and durable mounting.Wide compatibility with BETA 2020-2026 models (Enduro RR, Enduro X-PRO, Cross RX and X-TRAINER)OE quality for precise fit and maximum reliabilityGenuine part, quick install and no compromise

Circlip A13

Shipped the 12/12/2025

BETA OEM Parts

Circlip A13

Circlip A13 – Genuine BETA part for the lubrication circuit. OEM fit for Enduro RR 350/390/430/480 4T MY16–MY19. Quick install, reliable performance.

Hex Socket Head Cap Screw UNI 5931 – T.C.C.H. | Chassis Accessories

Shipped the 12/12/2025

BETA OEM Parts

Hex Socket Head Cap Screw UNI 5931 – T.C.C.H.

Hex socket head screw, UNI 5931 – T.C.C.H.High-strength, reliable fastener for chassis applications.Broad compatibility with TRIAL EVO 125/200/250/300 2T variants (2021–2025).

Screw 5.25 T.C.C.H.UNI 5931 – Genuine Beta Frame Fixing – RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Screw 5.25 T.C.C.H.UNI 5931

Genuine Beta frame fixing screw (Accessoires du châssis)5.25 mm high-strength screw (T.C.C.H.UNI 5931)Corrosion-resistant treated steel for long-lasting durabilityPrecise fit and reliable mounting for Beta 2025 50cc Motard/Enduro variantsQuality assured by Beta and RAW Motorsports

8A Auto-Locking Nut – Lower | OEM Beta Exhaust Part | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

8A Auto-Locking Nut – Lower

8A Auto-Locking Nut – Lower is an OEM Beta exhaust part. Quick, reliable tightening built to withstand vibrations and harsh riding conditions, ensuring safety and performance.

8A Nut – Top Auto-Lock | Beta Chassis Part - RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

8A Nut – Top Auto-Lock

8A Nut – Top Auto-LockGenuine Beta chassis part designed for secure fastening. Ensures reliable top auto-lock on Beta 50cc and 300cc variants listed in the compatibility section.Auto-locking for enhanced safety during ride and service.Easy, tool-free installation with no modification required.Part reference 13.17010.000, authenticity guaranteed by RAW...

O-ring exhaust 43.3 Vyton OEM KTM - RAW Motorsports

O-ring exhaust 43.3 Vyton OEM KTM - RAW Motorsports 2

Shipped the 12/12/2025

BETA OEM Parts

O-ring exhaust 43.3 Vyton

KTM OEM part: O-ring exhaust 43.3 Vyton. RAW reference 10.66930.000.Brand: KTMRAW reference: 10.66930.000OEM reference: 10.66930.000Material: VytonOriginal KTM part

Bolt 5.25 RS CH 8

Shipped the 12/12/2025

BETA OEM Parts

Bolt 5.25 RS CH 8

C24.31.042.00.00

OEM BETA bolt for reliable, precise engine mounting.Exact dimensions match original equipment for a seamless install.Durable material with anti-corrosion finish for long life.

M5x8 Allen Bolt – 10.9 UNI7380 ZDB – Original Motorcycle Part

Shipped the 12/12/2025

BETA OEM Parts

M5x8 Allen Bolt – Grade 10.9 – UNI7380 – ZDB

M5x8 Allen bolt, grade 10.9, UNI7380, ZDB finish. Original equipment part for motorcycle mounts and suspensions.High-strength M5x8 boltUNI7380 standard, corrosion-resistant ZDB finishOEM quality for precise fit and reliabilitySuitable for standard motorcycle mounting hardware

Oil reservoir cap screw – Black

Shipped the 12/12/2025

BETA OEM Parts

Oil reservoir cap screw – Black

Oil reservoir cap screw – genuine part, designed for the oil reservoir cap and hydraulic system. Built to ensure a precise fit and reliable sealing on the listed Beta models.

BETA RR 2T 50 passenger footrest kit

-10%

Shipped the 12/12/2025

BETA RR 2T 50 passenger footrest kit

034.46.009.82.00

€90.86 €100.95

This BETA passenger footrest kit for RR 2T 50 is a genuine part designed to fit or replace the passenger footrests on your motorcycle with a clean and reliable setup.Genuine BETA partDesigned for passenger footrest equipmentIdeal for replacement or complete fittingClear OEM reference for accurate ordering

Bearing - 25.47.12

Shipped the 12/12/2025

BETA OEM Parts

Bearing - 25.47.12

020.42.004.00.00

- Original BETA part for Front Wheel Bearing - Reference 020.42.004.00.00 - Wide compatibility across BETA 2024-2026 Enduro/Cross (125-480cc) - Direct fit, precise alignment, guaranteed reliability - Easy install, low friction, long-lasting

Customers who bought this product also bought:

Brake caliper – Original

Hors stock - Délai incertain

BETA OEM Parts

Brake caliper – Original

024.36.012.00.00

Brake caliper – Original. Genuine part ensuring quick and reliable installation on Beta 50cc 2T motorcycles.Certified original part for precise fit and reliability.Powerful, progressive braking performance for RR and Motard Track/Racing variants.Durable materials and precision machining for longevity and safety.Direct plug-and-play replacement with no...

Rear mudguard – Black

BETA OEM Parts

Rear mudguard – Black

024.43.004.10.59

OEM rear mudguard in black for Beta Motard RR 50 2TDirect fit for 2012-2020 SPORT and TRACK versionsUV resistant robust plasticReference 024.43.004.10.59

Rear Mudguard – RED RR

BETA OEM Parts

Rear Mudguard – RED RR

043.43.004.00.97

Rear mudguard RED RR, original BETA part, perfectly suited for RED RR models and Enduro/Motard variants. Designed to protect the frame and rear components from spray and debris while preserving the SPORTY RED RR look.OEM-compatible with BETA on 50cc and 125cc (2021-2025), Enduro and MotardDurable material and finish matching RED RR colorEasy installation...

Tool Kit Bag RR 4T 125cc – with tools

Hors stock - Délai incertain

BETA OEM Parts

Tool Kit Bag RR 4T 125cc – with tools

021.44.003.80.00

Official OEM part – RR 4T 125cc tool kit bag with tools included, reliability guaranteed.Broad compatibility across 2020–2025 125cc RR/Enduro/Motard 4T models.Sturdy storage and optimal organization for the workshop and bike.Easy and quick installation with convenient tool access.

Handlebar – RR Red

Shipped the 12/12/2025

BETA OEM Parts

Handlebar – RR Red

014.35.050.00.59

OEM Handlebar – RR Red, reference 014.35.050.00.59. Original part for Enduro 50cc and 125cc, delivering reliability and precise steering. Ensures perfect fit for RR/X RR variants with improved control on tough terrain.

Headlight plate – Black

BETA OEM Parts

Headlight plate – Black

020.43.050.10.52

Original Beta headlight plate in black – precisely designed for MOTARD RR and variants, delivering a perfect fit and premium look.Precise fit and quick install with original mounting pointsDurable black finish, weather resistantReliability and compatibility guaranteed by genuine Beta engineering

Motard Kickstand – 06

Shipped the 12/12/2025

BETA OEM Parts

Motard Kickstand – 06

Motard Kickstand ’06 — original Beta part, robust and perfectly suited for Beta Motard 50cc 2T models. Built for reliability and long life with OEM engineering. Beta OEM design for perfect fit Resilient and durable for daily use Easy, quick installation with standard fasteners

Headlight Plate – Red RR 4T 125 LC

BETA OEM Parts

Headlight Plate – Red RR 4T 125 LC

043.43.008.00.97

Beta OEM Red Headlight Plate for RR 4T 125 LC. Direct replacement for the front headlight area, ensuring perfect fit and reliable performance.Part number: 043.43.008.00.97Compatibility: Beta 2023-2025 RR 125 4T T (Enduro and Motard Red RR 125 4T T)OEM-grade, original equipment qualityEasy installation with no modification requiredBenefits: preserves...

Customers who bought this product also bought:

Complete clutch lever – OEM Beta – RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Complete clutch lever

OEM Beta complete clutch lever, direct-fit for 2025 Beta MOTARD/ENDURO 50cc and 125cc variants.Original equipment quality and compatibility.Easy replacement with no modifications required.Black finish with optimized ergonomics for precise engagement.

Radiator cap RK6-50 – Beta Original Part – 50cc 2T

Shipped the 12/12/2025

BETA OEM Parts

Radiator cap – RK6-50

RK6-50 radiator cap, Beta original part for 50cc 2T motorcycles. Factory-grade quality ensuring perfect compatibility and long-lasting reliability.Internal reference 29.01260.000 for trackingQuick, tool-free fit for fast maintenanceBroad compatibility across Beta 50cc 2T MOTARD/ENDURO RR variants (2005-2025)

M6x10 Bolt – Original BETA Exhaust Fixing | RAW Motorsports

BETA OEM Parts

M6x10 Bolt

Original BETA M6x10 bolt, a dedicated exhaust fixing that delivers reliable clamping and seamless compatibility with BETA exhaust systems.Genuine BETA part for guaranteed compatibilityM6 x 10 mm size for standard fixingsQuality and reliability backed by manufacturer reference