Carburetor Needle – 125 LC (OEM) | RAW Motorsports

Carburetor Needle – 125 LC (OEM) | RAW Motorsports

Carburetor needle – 125 LC

Brand: BETA

Reference 021.12.024.00.00

Hors stock - Délai incertain

€19.44

Tax included

Carburetor Needle – 125 LC OEM BETA part ensuring precise fuel metering and stable idle. Optimizes idle and throttle response on 125cc LC models for reliable performance.

Stock availibility No

Quantité

Description
Vehicle compatibility

Technical description

OEM BETA carburetor needle for 125 LC
Ensures precise air fuel mixture and stable idle
Designed for the original carburetion system for reliable performance on 125 cc LC and 4T LC models

Customer benefits

Direct OEM replacement for optimal compatibility and reliability
Improved throttle response and engine stability
Extended service life when used with other genuine BETA parts

Compatibility

Compatible with BETA 125 cc 4T LC and RR 125 4T LC/R LC models 2013 2020

Notes

Install with care following the service manual and replace seals if necessary

Compatibilités véhicule

Modèles compatibles vérifiés

26

BETA 2013-2020

Voir tous les modèles compatibles

2020 BETA ENDURO BLACK RR 125 4T LC 125cc BETA ENDURO RED RR 125 4T LC 125cc BETA ENDURO RR 125 4T R LC 125cc BETA ENDURO WHITE RR 125 4T LC 125cc BETA MOTARD BLACK RR 125 4T LC 125cc BETA MOTARD RR 125 4T R LC 125cc BETA MOTARD WHITE RR 125 4T LC 125cc

2019 BETA ENDURO RR 125 4T LC MY19 125cc BETA ENDURO RR 125 4T R LC 125cc BETA MOTARD RR 125 4T LC MY19 125cc BETA MOTARD RR 125 4T R LC 125cc

2018 BETA ENDURO RR 125 4T LC MY18 - CBS - FDV 125cc BETA ENDURO RR 125 4T LC MY18 - CBS 125cc BETA ENDURO RR 125 LC MY17 125cc BETA MOTARD RR 125 4T LC MY18 - CBS - FDV 125cc BETA MOTARD RR 125 4T LC MY18 - CBS 125cc

2017 BETA MOTARD RR 125 LC MY17 125cc

2016 BETA ENDURO RR 125 LC MY16 125cc BETA MOTARD RR 125 LC MY16 125cc

2015 BETA ENDURO RR 125 LC MY14-MY15 125cc BETA MOTARD RR 125 LC MY14-MY15 125cc

2014 BETA ENDURO RR 125 LC MY14-MY15 125cc BETA MOTARD RR 125 4T LC MY13-MY14 125cc BETA MOTARD RR 125 LC MY14-MY15 125cc

2013 BETA ENDURO RR 125 LC MY13 125cc BETA MOTARD RR 125 4T LC MY13-MY14 125cc

16 other products in the same category:

Footrest Pin – 3x20 mm – Original Equipment

Shipped the 12/12/2025

BETA OEM Parts

Footrest Pin – 3x20

Footrest Pin 3x20 mm, original equipment part designed for a secure, durable mounting of the footrest on compatible models. Quick fit and robust under vibration and dirt.3x20 mm dimensions for precise alignmentCorrosion and impact resistant

T.C.C.E. M5x20 Screw

Shipped the 12/12/2025

BETA OEM Parts

T.C.C.E. M5x20 Screw

T.C.C.E. M5x20 Screw, original Beta part for engine cover. Quick, reliable replacement for 50cc 2T Beta bikes.OEM quality from BETA: exact fitSize M5 x 20 mm for secure mountingCorrosion-resistant steel, durable under vibrationBroad compatibility with 50cc Beta Motard/Enduro 2T models (2020-2025)

EPDM O-ring 23,52.1,78 – Clutch OEM Beta | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

EPDM O-ring – 23,52.1,78

OEM Beta EPDM O-ring for clutch seal, durable and oil resistant.Precise fit for Beta clutch assemblies, easy replacement.EPDM material ensures long-lasting performance under off-road conditions.

OR 25,12.1,78

Shipped the 12/12/2025

BETA OEM Parts

OR 25,12.1,78

Original equipment replacement, engineered for perfect fit and long-lasting reliability.Compatible with Enduro and Cross ranges 2020-2026 (125cc to 480cc, 2T/4T).Direct-fit installation with no adaptation, ensuring improved handling and stability.

BETA Washer 10.20.1,5 – Chassis Accessories | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Washer 10.20.1,5

031.32.001.00.00

Original BETA washer, 10.20.1,5, designed for chassis components to ensure a reliable and durable mounting.Wide compatibility with BETA 2020-2026 models (Enduro RR, Enduro X-PRO, Cross RX and X-TRAINER)OE quality for precise fit and maximum reliabilityGenuine part, quick install and no compromise

Circlip A13

Shipped the 12/12/2025

BETA OEM Parts

Circlip A13

Circlip A13 – Genuine BETA part for the lubrication circuit. OEM fit for Enduro RR 350/390/430/480 4T MY16–MY19. Quick install, reliable performance.

Hex Socket Head Cap Screw UNI 5931 – T.C.C.H. | Chassis Accessories

Shipped the 12/12/2025

BETA OEM Parts

Hex Socket Head Cap Screw UNI 5931 – T.C.C.H.

Hex socket head screw, UNI 5931 – T.C.C.H.High-strength, reliable fastener for chassis applications.Broad compatibility with TRIAL EVO 125/200/250/300 2T variants (2021–2025).

Screw 5.25 T.C.C.H.UNI 5931 – Genuine Beta Frame Fixing – RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Screw 5.25 T.C.C.H.UNI 5931

Genuine Beta frame fixing screw (Accessoires du châssis)5.25 mm high-strength screw (T.C.C.H.UNI 5931)Corrosion-resistant treated steel for long-lasting durabilityPrecise fit and reliable mounting for Beta 2025 50cc Motard/Enduro variantsQuality assured by Beta and RAW Motorsports

8A Auto-Locking Nut – Lower | OEM Beta Exhaust Part | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

8A Auto-Locking Nut – Lower

8A Auto-Locking Nut – Lower is an OEM Beta exhaust part. Quick, reliable tightening built to withstand vibrations and harsh riding conditions, ensuring safety and performance.

8A Nut – Top Auto-Lock | Beta Chassis Part - RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

8A Nut – Top Auto-Lock

8A Nut – Top Auto-LockGenuine Beta chassis part designed for secure fastening. Ensures reliable top auto-lock on Beta 50cc and 300cc variants listed in the compatibility section.Auto-locking for enhanced safety during ride and service.Easy, tool-free installation with no modification required.Part reference 13.17010.000, authenticity guaranteed by RAW...

O-ring exhaust 43.3 Vyton OEM KTM - RAW Motorsports

O-ring exhaust 43.3 Vyton OEM KTM - RAW Motorsports 2

Shipped the 12/12/2025

BETA OEM Parts

O-ring exhaust 43.3 Vyton

KTM OEM part: O-ring exhaust 43.3 Vyton. RAW reference 10.66930.000.Brand: KTMRAW reference: 10.66930.000OEM reference: 10.66930.000Material: VytonOriginal KTM part

Bolt 5.25 RS CH 8

Shipped the 12/12/2025

BETA OEM Parts

Bolt 5.25 RS CH 8

C24.31.042.00.00

OEM BETA bolt for reliable, precise engine mounting.Exact dimensions match original equipment for a seamless install.Durable material with anti-corrosion finish for long life.

M5x8 Allen Bolt – 10.9 UNI7380 ZDB – Original Motorcycle Part

Shipped the 12/12/2025

BETA OEM Parts

M5x8 Allen Bolt – Grade 10.9 – UNI7380 – ZDB

M5x8 Allen bolt, grade 10.9, UNI7380, ZDB finish. Original equipment part for motorcycle mounts and suspensions.High-strength M5x8 boltUNI7380 standard, corrosion-resistant ZDB finishOEM quality for precise fit and reliabilitySuitable for standard motorcycle mounting hardware

Oil reservoir cap screw – Black

Shipped the 12/12/2025

BETA OEM Parts

Oil reservoir cap screw – Black

Oil reservoir cap screw – genuine part, designed for the oil reservoir cap and hydraulic system. Built to ensure a precise fit and reliable sealing on the listed Beta models.

BETA RR 2T 50 passenger footrest kit

-10%

Shipped the 12/12/2025

BETA RR 2T 50 passenger footrest kit

034.46.009.82.00

€90.86 €100.95

This BETA passenger footrest kit for RR 2T 50 is a genuine part designed to fit or replace the passenger footrests on your motorcycle with a clean and reliable setup.Genuine BETA partDesigned for passenger footrest equipmentIdeal for replacement or complete fittingClear OEM reference for accurate ordering

Bearing - 25.47.12

Shipped the 12/12/2025

BETA OEM Parts

Bearing - 25.47.12

020.42.004.00.00

- Original BETA part for Front Wheel Bearing - Reference 020.42.004.00.00 - Wide compatibility across BETA 2024-2026 Enduro/Cross (125-480cc) - Direct fit, precise alignment, guaranteed reliability - Easy install, low friction, long-lasting

Customers who bought this product also bought:

Washer Spacer 9x13x0.4

Shipped the 12/12/2025

BETA OEM Parts

Washer Spacer 9x13x0.4

Official Beta washer spacer for the front wheel, dimensions 9x13x0,4. OEM part ensuring precise fit and optimum reliability on Beta Enduro RR/X-Pro models from 2025-2026 and newer.

O-ring seal D.1.9×84 – Original Beta Part (Ref. 021.09.005.00.00) – RAW Motorsports

Hors stock - Délai incertain

BETA OEM Parts

O-RING 1.9x84

021.09.005.00.00

Original Beta part – O-ring seal D.1.9×84 for reliable sealing in the Beta 125cc range. Dimensionally precise replacement compatible with 2013-2020 Enduro and Motard models listed in compatibility. Durable material resists heat and oil; easy install for long-lasting reliability.

U-shaped hose

Hors stock - Délai incertain

BETA OEM Parts

U-shaped hose

021.39.003.00.00

Genuine BETA U-shaped hose for the cooling system, designed for 125cc Motard/Enduro models. Reliable OEM quality, easy to install and built to last.Compatibility: Beta 2013-2020 125cc Motard/EnduroHeat- and vibration-resistant materialRapid installation, OEM reliability

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA 2

BETA OEM Parts

Oil seal Ø53.6×2.4

021.08.003.00.00

Original oil seal Ø53.6×2.4 for lubrication circuit. Precise dimensions for quick, reliable fit. Reliable sealing and longer service life for 125cc Beta Enduro & Motard (2013-2020).

DIN125 Washer – Ø6 × Ø12 × 1.6 mm – BETA OEM for Carburetor | RAW Motorsports

BETA OEM Parts

Washer – Ø6 × Ø12 × 1.6 mm – DIN 125

OEM BETA carburetor partDIN125 Washer – Ø6 × Ø12 × 1.6 mmEasy installation, precise fit and guaranteed reliabilityMaterial compliant, corrosion resistant and durableBroad compatibility across BETA 2024–2026 ranges (see product page)

O-ring seal Ø35.7×Ø3.5 – Original part – Lubrication circuit

BETA OEM Parts

O-ring seal Ø35.7×Ø3.5

021.08.012.00.00

O-ring seal Ø35,7×Ø3,5 – pièce d’origine pour le circuit de lubrification, référence 021.08.012.00.00. Précision d’ajustement et étanchéité fiable.Diamètre intérieur et extérieur: Ø35.7 × Ø3.5 (mm)Matériau et revêtement adaptés aux huiles moto courantesMontage rapide et compatibilité vérifiée sur les versions 125cc 4T LC (Motard/Enduro)Pièce d’origine...

Filter Box Boot – Standard

Hors stock - Délai incertain

BETA OEM Parts

Filter Box Boot – Standard

021.38.022.00.59

Genuine BETA part for air box 125cc 4T LC.Broad compatibility with MOTARD/ENDURO RR 125 4T LC and MY13–MY20 variants.Reliable sealing and airflow for consistent performance.

Carburetor ring – 125 LC

Hors stock - Délai incertain

BETA OEM Parts

Carburetor ring – 125 LC

021.12.025.00.00

Genuine OEM carburetor ring for 125 LC.OEM-grade quality ensuring a perfect fit and long-lasting reliability.Compatible with Beta 125cc models from 2013 to 2020 (Motard and Enduro).Easy installation with no modification required.

Customers who bought this product also bought:

Carburetor Piston 125 LC – OEM Beta Part | RAW Motorsports

Hors stock - Délai incertain

BETA OEM Parts

Carburetor Piston – 125 LC

021.12.029.00.00

Original carburetor piston for 125 LC. Compatibility across 125cc 4T LC/R LC models (Motard, Enduro and RR) from 2013 to 2020. Reference 021.12.029.00.00. OEM quality and Beta reliability.

RR 4T 125 LC Crankcase Cover Gasket – Beta Original Part | RAW Motorsports

Shipped the 13/12/2025

BETA OEM Parts

RR 4T 125 LC Crankcase Cover Gasket

021.01.012.00.00

Crankcase Cover Gasket RR 4T 125 LC – original Beta part, ensuring a perfect seal for the engine crankcase and protecting internal components from dust and oil leaks.Durable sealing for reliable operation in all riding conditions.High quality materials and precise machining for a snug fit.Easy installation with no modification required.Compatibility...

O-ring seal Ø35.7×Ø3.5 – Original part – Lubrication circuit

BETA OEM Parts

O-ring seal Ø35.7×Ø3.5

021.08.012.00.00

O-ring seal Ø35,7×Ø3,5 – pièce d’origine pour le circuit de lubrification, référence 021.08.012.00.00. Précision d’ajustement et étanchéité fiable.Diamètre intérieur et extérieur: Ø35.7 × Ø3.5 (mm)Matériau et revêtement adaptés aux huiles moto courantesMontage rapide et compatibilité vérifiée sur les versions 125cc 4T LC (Motard/Enduro)Pièce d’origine...

OEM Spacer – 6.5/9.0/13.5.4.8 | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Spacer 6.5/9.0/13.5.4.8

Genuine OEM component from BETA for reliable, precise mounting.Precision spacer – size 6.5/9.0/13.5 with 4.8 thicknessWide compatibility with recent BETA models (Enduro XTrainer, Trial Evo)Direct-fit installation with no modificationOEM quality for performance and longevity

Carburetor clamp 125 LC – Genuine Beta part | RAW Motorsports - BETA

Hors stock - Délai incertain

BETA OEM Parts

Carburetor clamp – 125 LC

021.12.032.00.00

Carburetor clamp 125 LC — genuine part, designed for reliable fit on Beta 125cc 4T LC Motard and Enduro models.Broad compatibility: 125cc 4T LC Motard/Enduro (2013-2020)Quick install and secure mount for stable idleDurable materials and OEM tolerances for lasting reliability

Organic Scooter Brake Pads ME361 – Tecnium | RAW Motorsports

Organic Scooter Brake Pads ME361 – Tecnium | RAW Motorsports 2

-40%

Shipped the 27/06/2026

Brake pads

Organic Scooter Brake Pads ME361

€10.08 €16.80

Tecnium Organic Scooter Brake Pads ME361, genuine part ensuring perfect compatibility and reliability for Beta 2025 scooter models (50cc/125cc).Quick bite with progressive feel for precise brakingLow dust and quiet operationDurable for urban and light sport riding

Carburetor Float Chamber Gasket 125 LC – OEM BETA | RAW Motorsports

Hors stock - Délai incertain

BETA OEM Parts

Carburetor Float Chamber Gasket – 125 LC

021.12.037.00.00

OEM Beta carburetor float chamber gasket for 125 LC.Reference: 021.12.037.00.00Original Equipment quality: reliability and perfect fitEasy replacement, no modification required

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA 2

BETA OEM Parts

Oil seal Ø53.6×2.4

021.08.003.00.00

Original oil seal Ø53.6×2.4 for lubrication circuit. Precise dimensions for quick, reliable fit. Reliable sealing and longer service life for 125cc Beta Enduro & Motard (2013-2020).

Carburetor Ring – 125 LC – Original Beta Part | RAW Motorsports

Hors stock - Délai incertain

BETA OEM Parts

Carburetor ring – 125 LC

021.12.033.00.00

Genuine BETA carburetor ring for 125 LC motorcycles.Broad compatibility with Beta 125cc RR/Enduro 4T LC (2013-2020).Easy installation, reliable OEM part ensuring seal integrity.

SEEGER 9E – Front Wheel OEM Part for BETA | RAW Motorsports

BETA OEM Parts

SEEGER 9E

SEEGER 9E OEM front wheel part for Beta. Factory-grade quality, precise fit and proven reliability. Supplied by RAW Motorsports for perfect compatibility and optimized performance.Broad compatibility for 2024-2026 Beta Enduro RR, X-PRO, X-Race and XTrainerOEM Beta part for precise and durable mountingEasy installation to restore off-road performance quickly