Chain Tensioner Seal – Original Part by BETA (125cc 4T)

Chain Tensioner Seal – Original Part by BETA (125cc 4T)

Chain tensioner seal

Brand: BETA

Reference 021.11.035.00.00

Last items in stock

€4.16

Tax included

Original part for guaranteed compatibility and long-term reliability.
Chain tensioner seal engineered to ensure sealing and prevent leaks and premature wear.
Durable materials and easy installation for reduced maintenance time and cost.
Compatible with 125cc 4T Enduro and Motard models from 2013 to 2019.

Stock availibility Yes

Quantité

Description
Vehicle compatibility

Chain Tensioner Seal – Original distribution part for 125cc 4T engines, designed to optimize sealing and protect the reliability of the timing system.

High build quality with oil- and heat-resistant materials for extended life.
Precise profile and tolerances for quick, accurate installation, reducing leaks and noise.
Original part ensuring seamless coordination with the rest of the chain and distribution area.
Broad compatibility across Enduro and Motard 125cc 4T LC models from 2013 to 2019 (MY13–MY19).

Compatibilités véhicule

Modèles compatibles vérifiés

19

BETA 2013-2019

Voir tous les modèles compatibles

2019 BETA ENDURO RR 125 4T LC MY19 125cc BETA ENDURO RR 125 4T R LC 125cc BETA MOTARD RR 125 4T LC MY19 125cc BETA MOTARD RR 125 4T R LC 125cc

2018 BETA ENDURO RR 125 4T LC MY18 - CBS - FDV 125cc BETA ENDURO RR 125 4T LC MY18 - CBS 125cc BETA ENDURO RR 125 LC MY17 125cc BETA MOTARD RR 125 4T LC MY18 - CBS - FDV 125cc BETA MOTARD RR 125 4T LC MY18 - CBS 125cc

2017 BETA MOTARD RR 125 LC MY17 125cc

2016 BETA ENDURO RR 125 LC MY16 125cc BETA MOTARD RR 125 LC MY16 125cc

2015 BETA ENDURO RR 125 LC MY14-MY15 125cc BETA MOTARD RR 125 LC MY14-MY15 125cc

2014 BETA ENDURO RR 125 LC MY14-MY15 125cc BETA MOTARD RR 125 4T LC MY13-MY14 125cc BETA MOTARD RR 125 LC MY14-MY15 125cc

2013 BETA ENDURO RR 125 LC MY13 125cc BETA MOTARD RR 125 4T LC MY13-MY14 125cc

In stock 1 Item

16 other products in the same category:

Footrest Pin – 3x20 mm – Original Equipment

Shipped the 12/12/2025

BETA OEM Parts

Footrest Pin – 3x20

Footrest Pin 3x20 mm, original equipment part designed for a secure, durable mounting of the footrest on compatible models. Quick fit and robust under vibration and dirt.3x20 mm dimensions for precise alignmentCorrosion and impact resistant

T.C.C.E. M5x20 Screw

Shipped the 12/12/2025

BETA OEM Parts

T.C.C.E. M5x20 Screw

T.C.C.E. M5x20 Screw, original Beta part for engine cover. Quick, reliable replacement for 50cc 2T Beta bikes.OEM quality from BETA: exact fitSize M5 x 20 mm for secure mountingCorrosion-resistant steel, durable under vibrationBroad compatibility with 50cc Beta Motard/Enduro 2T models (2020-2025)

EPDM O-ring 23,52.1,78 – Clutch OEM Beta | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

EPDM O-ring – 23,52.1,78

OEM Beta EPDM O-ring for clutch seal, durable and oil resistant.Precise fit for Beta clutch assemblies, easy replacement.EPDM material ensures long-lasting performance under off-road conditions.

OR 25,12.1,78

Shipped the 12/12/2025

BETA OEM Parts

OR 25,12.1,78

Original equipment replacement, engineered for perfect fit and long-lasting reliability.Compatible with Enduro and Cross ranges 2020-2026 (125cc to 480cc, 2T/4T).Direct-fit installation with no adaptation, ensuring improved handling and stability.

BETA Washer 10.20.1,5 – Chassis Accessories | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Washer 10.20.1,5

031.32.001.00.00

Original BETA washer, 10.20.1,5, designed for chassis components to ensure a reliable and durable mounting.Wide compatibility with BETA 2020-2026 models (Enduro RR, Enduro X-PRO, Cross RX and X-TRAINER)OE quality for precise fit and maximum reliabilityGenuine part, quick install and no compromise

Circlip A13

Shipped the 12/12/2025

BETA OEM Parts

Circlip A13

Circlip A13 – Genuine BETA part for the lubrication circuit. OEM fit for Enduro RR 350/390/430/480 4T MY16–MY19. Quick install, reliable performance.

Hex Socket Head Cap Screw UNI 5931 – T.C.C.H. | Chassis Accessories

Shipped the 12/12/2025

BETA OEM Parts

Hex Socket Head Cap Screw UNI 5931 – T.C.C.H.

Hex socket head screw, UNI 5931 – T.C.C.H.High-strength, reliable fastener for chassis applications.Broad compatibility with TRIAL EVO 125/200/250/300 2T variants (2021–2025).

Screw 5.25 T.C.C.H.UNI 5931 – Genuine Beta Frame Fixing – RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

Screw 5.25 T.C.C.H.UNI 5931

Genuine Beta frame fixing screw (Accessoires du châssis)5.25 mm high-strength screw (T.C.C.H.UNI 5931)Corrosion-resistant treated steel for long-lasting durabilityPrecise fit and reliable mounting for Beta 2025 50cc Motard/Enduro variantsQuality assured by Beta and RAW Motorsports

8A Auto-Locking Nut – Lower | OEM Beta Exhaust Part | RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

8A Auto-Locking Nut – Lower

8A Auto-Locking Nut – Lower is an OEM Beta exhaust part. Quick, reliable tightening built to withstand vibrations and harsh riding conditions, ensuring safety and performance.

8A Nut – Top Auto-Lock | Beta Chassis Part - RAW Motorsports

Shipped the 12/12/2025

BETA OEM Parts

8A Nut – Top Auto-Lock

8A Nut – Top Auto-LockGenuine Beta chassis part designed for secure fastening. Ensures reliable top auto-lock on Beta 50cc and 300cc variants listed in the compatibility section.Auto-locking for enhanced safety during ride and service.Easy, tool-free installation with no modification required.Part reference 13.17010.000, authenticity guaranteed by RAW...

O-ring exhaust 43.3 Vyton OEM KTM - RAW Motorsports

O-ring exhaust 43.3 Vyton OEM KTM - RAW Motorsports 2

Shipped the 12/12/2025

BETA OEM Parts

O-ring exhaust 43.3 Vyton

KTM OEM part: O-ring exhaust 43.3 Vyton. RAW reference 10.66930.000.Brand: KTMRAW reference: 10.66930.000OEM reference: 10.66930.000Material: VytonOriginal KTM part

Bolt 5.25 RS CH 8

Shipped the 12/12/2025

BETA OEM Parts

Bolt 5.25 RS CH 8

C24.31.042.00.00

OEM BETA bolt for reliable, precise engine mounting.Exact dimensions match original equipment for a seamless install.Durable material with anti-corrosion finish for long life.

M5x8 Allen Bolt – 10.9 UNI7380 ZDB – Original Motorcycle Part

Shipped the 12/12/2025

BETA OEM Parts

M5x8 Allen Bolt – Grade 10.9 – UNI7380 – ZDB

M5x8 Allen bolt, grade 10.9, UNI7380, ZDB finish. Original equipment part for motorcycle mounts and suspensions.High-strength M5x8 boltUNI7380 standard, corrosion-resistant ZDB finishOEM quality for precise fit and reliabilitySuitable for standard motorcycle mounting hardware

Oil reservoir cap screw – Black

Shipped the 12/12/2025

BETA OEM Parts

Oil reservoir cap screw – Black

Oil reservoir cap screw – genuine part, designed for the oil reservoir cap and hydraulic system. Built to ensure a precise fit and reliable sealing on the listed Beta models.

BETA RR 2T 50 passenger footrest kit

-10%

Shipped the 12/12/2025

BETA RR 2T 50 passenger footrest kit

034.46.009.82.00

€90.86 €100.95

This BETA passenger footrest kit for RR 2T 50 is a genuine part designed to fit or replace the passenger footrests on your motorcycle with a clean and reliable setup.Genuine BETA partDesigned for passenger footrest equipmentIdeal for replacement or complete fittingClear OEM reference for accurate ordering

Bearing - 25.47.12

Shipped the 12/12/2025

BETA OEM Parts

Bearing - 25.47.12

020.42.004.00.00

- Original BETA part for Front Wheel Bearing - Reference 020.42.004.00.00 - Wide compatibility across BETA 2024-2026 Enduro/Cross (125-480cc) - Direct fit, precise alignment, guaranteed reliability - Easy install, low friction, long-lasting

Customers who bought this product also bought:

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA 2

BETA OEM Parts

Oil seal Ø53.6×2.4

021.08.003.00.00

Original oil seal Ø53.6×2.4 for lubrication circuit. Precise dimensions for quick, reliable fit. Reliable sealing and longer service life for 125cc Beta Enduro & Motard (2013-2020).

Clutch cover gasket – Standard

BETA OEM Parts

Clutch cover gasket – Standard

021.01.007.00.00

Original BETA clutch cover gasket for reliable engine protection and sealed operation.Direct fit on 125cc 4T LC Enduro and Motard modelsCrafted with genuine BETA materialsEasy installation, no modification required

Cylinder Base Gasket – Original Part by BETA 125cc Enduro & Motard

BETA OEM Parts

Cylinder base gasket

021.11.006.00.00

Original BETA cylinder base gasket for 125cc 4T engines, tailored for Enduro and Motard models. Easy fit, optimal sealing and reliable performance for long-lasting engine integrity.Factory-grade quality for perfect fitDurable seal minimizes compression lossDesigned for endurance riding and reliability

O-ring seal D.1.9×84 – Original Beta Part (Ref. 021.09.005.00.00) – RAW Motorsports

Hors stock - Délai incertain

BETA OEM Parts

O-RING 1.9x84

021.09.005.00.00

Original Beta part – O-ring seal D.1.9×84 for reliable sealing in the Beta 125cc range. Dimensionally precise replacement compatible with 2013-2020 Enduro and Motard models listed in compatibility. Durable material resists heat and oil; easy install for long-lasting reliability.

Oil seal D.2,9 – Ø2.9 mm

Shipped the 13/12/2025

BETA OEM Parts

Oil seal D.2,9 – Ø2.9 mm

021.11.002.00.00

Original Beta part – Oil seal Ø2.9 mmCompatible with Beta 125cc 4T LC RR/Enduro models (2013-2020)Reliable seal to prevent oil leaks and protect engine performance

Flanged nut M12x1.25x11 – Original BETA motorcycle part

Hors stock - Délai incertain

BETA OEM Parts

Flanged nut – M12x1.25x11

021.10.001.00.00

Flanged nut – M12x1.25x11 original BETA for reliable, durable mounting.Metric thread M12x1.25 with 11 mm effective length for precise torque.Rugged design resists vibrations and moisture, ideal for both off-road and on-road use.Compatibility confirmed with BETA 125cc MOTARD RR 125 4T R and ENDURO RR 125 4T R LC/LC MY18-MY25 and more (full list in store).

Head gasket 0.2 mm – Original Beta spare part | RAW Motorsports - BETA

BETA OEM Parts

Head gasket – 0.2 mm

021.11.005.00.00

Original Beta head gasket, thickness 0.2 mm, designed to deliver perfect sealing and durable reliability on 125cc 4T LC engines.Guaranteed compatibility with Beta 125cc Enduro and Motard 4T LC models (2013-2020).Precise thickness ensures proper compression and optimal engine performance.Easy to replace during routine maintenance, with no modification...

RR 4T 125 LC Crankcase Cover Gasket – Beta Original Part | RAW Motorsports

Shipped the 13/12/2025

BETA OEM Parts

RR 4T 125 LC Crankcase Cover Gasket

021.01.012.00.00

Crankcase Cover Gasket RR 4T 125 LC – original Beta part, ensuring a perfect seal for the engine crankcase and protecting internal components from dust and oil leaks.Durable sealing for reliable operation in all riding conditions.High quality materials and precise machining for a snug fit.Easy installation with no modification required.Compatibility...

Customers who bought this product also bought:

Cylinder Base Gasket – Original Part by BETA 125cc Enduro & Motard

BETA OEM Parts

Cylinder base gasket

021.11.006.00.00

Original BETA cylinder base gasket for 125cc 4T engines, tailored for Enduro and Motard models. Easy fit, optimal sealing and reliable performance for long-lasting engine integrity.Factory-grade quality for perfect fitDurable seal minimizes compression lossDesigned for endurance riding and reliability

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA

Oil Seal Ø53.6×2.4 – Original seal for Lubrication Circuit – RAW Motorsports BETA 2

BETA OEM Parts

Oil seal Ø53.6×2.4

021.08.003.00.00

Original oil seal Ø53.6×2.4 for lubrication circuit. Precise dimensions for quick, reliable fit. Reliable sealing and longer service life for 125cc Beta Enduro & Motard (2013-2020).

RR 4T 125 LC Crankcase Cover Gasket – Beta Original Part | RAW Motorsports

Shipped the 13/12/2025

BETA OEM Parts

RR 4T 125 LC Crankcase Cover Gasket

021.01.012.00.00

Crankcase Cover Gasket RR 4T 125 LC – original Beta part, ensuring a perfect seal for the engine crankcase and protecting internal components from dust and oil leaks.Durable sealing for reliable operation in all riding conditions.High quality materials and precise machining for a snug fit.Easy installation with no modification required.Compatibility...

Head gasket 0.2 mm – Original Beta spare part | RAW Motorsports - BETA

BETA OEM Parts

Head gasket – 0.2 mm

021.11.005.00.00

Original Beta head gasket, thickness 0.2 mm, designed to deliver perfect sealing and durable reliability on 125cc 4T LC engines.Guaranteed compatibility with Beta 125cc Enduro and Motard 4T LC models (2013-2020).Precise thickness ensures proper compression and optimal engine performance.Easy to replace during routine maintenance, with no modification...

Flanged nut M12x1.25x11 – Original BETA motorcycle part

Hors stock - Délai incertain

BETA OEM Parts

Flanged nut – M12x1.25x11

021.10.001.00.00

Flanged nut – M12x1.25x11 original BETA for reliable, durable mounting.Metric thread M12x1.25 with 11 mm effective length for precise torque.Rugged design resists vibrations and moisture, ideal for both off-road and on-road use.Compatibility confirmed with BETA 125cc MOTARD RR 125 4T R and ENDURO RR 125 4T R LC/LC MY18-MY25 and more (full list in store).

O-ring seal D.1.9×84 – Original Beta Part (Ref. 021.09.005.00.00) – RAW Motorsports

Hors stock - Délai incertain

BETA OEM Parts

O-RING 1.9x84

021.09.005.00.00

Original Beta part – O-ring seal D.1.9×84 for reliable sealing in the Beta 125cc range. Dimensionally precise replacement compatible with 2013-2020 Enduro and Motard models listed in compatibility. Durable material resists heat and oil; easy install for long-lasting reliability.

Water Pump Cover Gasket – OEM BETA | RAW Motorsports

Hors stock - Délai incertain

BETA OEM Parts

Water pump cover gasket

021.09.010.00.00

OEM-grade water pump cover gasket from BETA, designed for reliable cooling system sealing.Compatible with 2013-2020 125cc Motard/Enduro RR 125 4T LC modelsReference 021.09.010.00.00Heat- and coolant-resistant material for durable seal