Caliper mounting bracket – Original BETA part | Brakes

Caliper mounting bracket – Original BETA part | Brakes

Caliper mounting bracket – Standard

Reference 015.36.006.50.00

Last items in stock

€10.41

Tax included

Original BETA brake system component – Caliper mounting bracket that is reliable and easy to install.

Direct-fit on factory mounting points, no modification required
OEM-grade durability and corrosion resistance
Secure braking performance for daily riding and track use

Stock availibility Yes

Quantité

Description
Vehicle compatibility

The original BETA brake system part is the caliper mounting bracket. Designed to ensure precise alignment and robust support of the brake caliper, it delivers factory-level performance on Beta 50cc 2T and RR models.

Direct installation on the original mounts, no modification needed
Materials and finish built for durability and corrosion resistance
Improved safety and braking consistency through accurate caliper alignment
Suitable for Motard/Enduro 50cc configurations

Compatibilités véhicule

Modèles compatibles vérifiés

43

BETA 2012-2026

Voir tous les modèles compatibles

2026 BETA ENDURO RED RR 50 2T 50cc BETA ENDURO WHITE RR 50 2T 50cc BETA MOTARD BLACK RR 50 2T 50cc BETA MOTARD RR 2T 50 X GREY 50cc BETA MOTARD WHITE RR 50 2T 50cc

2025 BETA ENDURO RED RR 50 2T 50cc BETA ENDURO WHITE RR 50 2T 50cc BETA MOTARD BLACK RR 50 2T 50cc BETA MOTARD RR 2T 50 X GREY 50cc BETA MOTARD WHITE RR 50 2T 50cc

2024 BETA MOTARD RR 2T 50 X GREY 50cc

2023 BETA ENDURO RED RR 50 2T 50cc BETA ENDURO WHITE RR 50 2T 50cc BETA MOTARD BLACK RR 50 2T 50cc BETA MOTARD WHITE RR 50 2T 50cc

2021 BETA ENDURO RED RR 50 50cc BETA ENDURO WHITE RR 50 50cc BETA MOTARD BLACK RR 50 50cc BETA MOTARD WHITE RR 50 50cc

2020 BETA ENDURO RED RR 50 2T 50cc BETA ENDURO WHITE RR 50 2T 50cc BETA MOTARD BLACK RR 50 2T 50cc BETA MOTARD WHITE RR 50 2T 50cc

2019 BETA ENDURO RR 50 2T 50cc BETA MOTARD RR 50 2T 50cc

2018 BETA ENDURO RR 50 2T 50cc BETA MOTARD RR 50 2T 50cc

2017 BETA ENDURO RR 50 2T 50cc BETA MOTARD RR 50 2T 50cc

2016 BETA ENDURO RE 125 125cc BETA ENDURO RR 50 50cc BETA MOTARD RR 50 50cc

2015 BETA ENDURO RR 125 125cc BETA ENDURO RR 50 50cc BETA MOTARD RR 50 50cc

2014 BETA ENDURO RR 125 125cc BETA ENDURO RR 50 50cc BETA MOTARD RR 50- 50cc

2013 BETA ENDURO RR 125 125cc BETA ENDURO RR 50 50cc BETA MOTARD RR 50 50cc

2012 BETA ENDURO RR 50 50cc BETA MOTARD RR 50 50cc

In stock 2 Items

Customers who bought this product also bought:

Knurled Washer Ø8.13 mm – OEM BETA Brake Part | RAW Motorsports

BETA OEM Parts

Knurled Washer Ø8.13 mm

OEM BETA – Knurled washer Ø8.13 mm for reliable, precise braking.High-grade materials and finish for durability in extreme riding conditions.Easy fit with no play and secure retention in brake assemblies.Broad compatibility across BETA Enduro RR and Motard lines (2025-2026) and X-PRO/Race variants.Part number 27.56055.000, supplied by RAW Motorsports.

License plate holder

BETA OEM Parts

License plate holder

036.43.006.10.59

Genuine Beta license plate holder for optimal fit and reliability. OEM reference 036.43.006.10.59, designed for Enduro XTRAINER and ENDURO RR series listed in RAW Motorsports. Easy install with no modifications and a clean, racing look.

Fork Nut – Original Spare Part by BETA | 024.34.083.00.00 | RAW Motorsports

BETA OEM Parts

Fork Nut

024.34.083.00.00

Fork Nut – Original part by BETA, reference 024.34.083.00.00, designed for the forks of 50cc MOTARD/ENDURO RR 50 2T models.Easy and reliable fit with precise tolerances.Robust material for corrosion and vibration resistance.Maintains fork alignment and rider safety.

Spacer

Ships today

BETA OEM Parts

Spacer

024.36.010.00.00

Spacer – pièce d’origine BETA pour le système de freinage.Pièce d’origine BETA, garantie de compatibilité et fiabilitéMontage rapide et précis sur les modèles MOTARD 50cc 2TConception adaptée au jeu et à l’alignement des composants de frein

Front brake lever – X 2102067 009

Ships today

BETA OEM Parts

Front brake lever – X 2102067 009

Front brake lever – original Beta part, new and ready for direct replacement for a reliable fit. Wide compatibility with 2024–2025 Beta 50cc and 125cc models. OEM quality for precise action and enhanced durability.

Drilled bolt Ø10.1 for brake line tube – original equipment brake component

Drilled bolt Ø10.1 for brake line tube – original equipment brake component 2

BETA OEM Parts

Drilled bolt Ø10.1 for brake line tube

Drilled bolt Ø10.1 for brake line tube – genuine brake componentReliable fit and compatibility with brake systemsEasy to install, supports maintenance and bleeding

Oil Exhaust Bolt Seal – Beta Carter – Ref 34.00900.000

-10%

Ships today

BETA OEM Parts

Oil Exhaust Bolt Seal

€0.49 €0.54

OEM-grade oil exhaust seal for Carter on Beta bikesPart Ref. 34.00900.000Compatible with Beta 50cc 2T Motard/Enduro models (2020-2025)Easy install, reliable seal, heat and oil resistant

Original Copper Seal – Brake Part for BETA (2026) Enduro & Cross

Ships today

BETA OEM Parts

Copper seal

Original part for the braking system.High‑strength copper seal designed for heat and wear resistance.Extensive compatibility with 2026 BETA Enduro RR and Cross RX ranges (125–480cc, 2T/4T).Maintains braking performance and reliability.

Customers who bought this product also bought:

Oil Exhaust Bolt Seal – Beta Carter – Ref 34.00900.000

-10%

Ships today

BETA OEM Parts

Oil Exhaust Bolt Seal

€0.49 €0.54

OEM-grade oil exhaust seal for Carter on Beta bikesPart Ref. 34.00900.000Compatible with Beta 50cc 2T Motard/Enduro models (2020-2025)Easy install, reliable seal, heat and oil resistant

Pump Control Wire Bridge – Genuine Beta OEM – Lubrication Circuit 50cc 2T

BETA OEM Parts

Pump control wire bridge

Genuine OEM part for the lubrication circuit. Pump control wire bridge delivers precise, reliable oil flow for Beta 50cc 2T bikes, with seamless compatibility.Compatibility verified with the 2020–2025 Motard and Enduro Beta 50cc 2T models and listed variants.New OEM component, ensures exact fit without modifications.Easy install, durable reliability for...

Bolt 7.40 IF CH 11 RS – OEM Beta suspension bolt

BETA OEM Parts

Bolt – 7.40 – IF CH 11 RS

OEM Beta bolt for precise suspension mounting. Designed for reliability and perfect compatibility across the Beta 2021-2025 50cc and 125cc models.OEM quality and corrosion resistanceEasy, fast installationPrecise dimensions for a snug fit

Rubber Oil Hoses – Black | Original Beta Part – Lubrication Circuit

BETA OEM Parts

Rubber Oil Hoses – Black

OEM Beta part for the lubrication circuit. Rubber oil hoses delivering reliable performance and easy installation, protecting engine life.High-grade rubber resistant to heat and abrasionFlexible and vibration resistant for a durable fitEasy installation with precise fit for 50cc Beta models

Adjusting screw – Standard | OEM BETA – 50cc 2T

BETA OEM Parts

Adjusting screw – Standard

Adjusting screw – Standard OEM BETA part for the lubrication circuit, ensuring perfect compatibility and long-lasting reliability. Reference 34.02420.000.

Right Footpeg Spring – Trial & Enduro (Beta OEM)

BETA OEM Parts

Right footpeg spring – Trial & Endur

OEM right footpeg spring for Beta, reliability and perfect compatibility.Designed for Trial and Enduro use, robust and easy to install.Quick fitment, no modification required, compatible with listed models.Product reference: 22.62010.000.Broad compatibility with Beta TRIAL EVO 80–300 (2T/4T, Senior/Factory/SS).

Spacer 8.12.17 – BETA OEM | RAW Motorsports

BETA OEM Parts

Spacer 8.12.17

OEM BETA – Spacer 8.12.17 (reference 13.46530.000).Exact dimensions 8.12.17 for precise fitting and preserved chassis geometry.Easy install with guaranteed compatibility across recent BETA ALP/RR models.

Left front hub spacer – OEM Beta part | RAW Motorsports

BETA OEM Parts

Left front hub spacer

024.41.006.00.00

OEM Beta left front hub spacerGuaranteed compatibility with Beta Motard 50cc 2T models (2012-2025)Precise hub alignment and front wheel stabilityOriginal equipment quality and reliability

TCEI 8.100 Screw – Beta Chassis Frame Fastener (50cc & 350cc)

BETA OEM Parts

TCEI 8.100 Screw

Beta chassis screw for frame assembly — robust and reliable fastenerGuaranteed compatibility with Beta 50cc and 350cc models (2020–2025) listed in specsHigh-quality materials and precise tolerances for a clean, secure fitEasy install, ensures stable chassis performance

Washer 8.16 – OEM BETA Suspension Part | RAW Motorsports

Out of supplier stock - Lead time uncertain

BETA OEM Parts

Washer 8.16

Washer 8.16 from BETA for suspension. OEM part number 27.49500.000, designed for precise fit and reliable performance on Beta suspension systems. Supplied by RAW Motorsports - BETA.OEM quality for uncompromised fit.Easy install with original mounting design.Durability for off-road use.